Hello!
A couple of months ago I made a grave error which caused my Nano
Tank of 2 years to crash. In the ensuing aftermath, I lost everything.
Now on to happier times!!
The new beginning:
My goal is to set the system back up as neatly and maintenance free as possible.
I plan on stocking the tank with an Orchid Dottyback, a Coral Banded
Shrimp, misc snails, Zoanthids, Ricordia and SPS.
System Specs
----------------
12g Nano Cube
Red Mahogany Oak Canopy w/ uv Glass & 90mm Fan
Matching Full Size Stand
70W HQI 10k Bulb (hooked up to a Ranco controller)
28w Actinic PC
28w Actinic PC
50W EBO Heater
Big Digital Temp Alert
S.C.W.D.
Maxi-Jet 900
1/4" & 3/8" Loc-Line
Top-off System (Float Switch, Relay, Powerhead & 5G Container)
Blue Plexiglass Wall w/ Overflow in Center
============================
All modifications made by myself.
I bought a used nanocube and stripped it down. Then I cut out a viewing area in vinyl.
I picked up a piece of blue plexiglass from Tap Plastics, cut out an overflow and drilled holes for the loc-line. The plumbing consists of different types of 1/2" elbows and soft plastic tubing.
Here is a picture of it siliconed in place. I shortened the two top slip elbows so that the entire plumbing can be lifted out and cleaned.
Back view.
Here is the whole enchilada.
The new live rock has a lot of yellow and green colors to it. I am pleased with the new aquascaping, as it has a lot of caves. Should be perfect for an Orchid Dottyback.
I think the camera took off 5 lbs. The tank actually looks much fuller in person.
